Sp-n738mal + / MAH + / MA + computer-controlled servo upper feeder
|
型号Model
|
SP-N738A
|
SP-N738B
|
SP-N738AL
|
SP-N738AH
|
|
马力Power
|
1.5kw
|
1.5kw
|
1.5kw
|
1.5kw
|
|
电热Heating Power
|
1.0kw
|
1.0kw
|
1.0kw
|
1.0kw
|
|
使用压力 Hydraulic Pressure
|
50kg/cm2
|
50kg/cm2
|
50kg/cm2
|
50kg/cm2
|
|
产量 Productivity
|
1600pais/8 hour
|
1600pais/8 hour
|
1600pais/8 hour
|
1600pais/8 hour
|
|
净重N.W.
|
1140kg
|
1050kg
|
1140kg
|
1170kg
|
|
毛重G.W.
|
出货时提供/Be provided before shipment
|
|
机械尺寸Dimension(L×W×H）
|
980(L)×1750（W）×1950（H）mm
|
|
包装尺寸Packing Size（L×W×H）
|
1030（L）×1860（W）×2160（H）mm
|
|
液压油量Hydraulic Oil Capacity
|
110liters
|
110liters
|
110liters
|
110liters
|
Sp-n738 series features
1. Sp-n738mal + / sp-n738ma1 + / sp-n738ma + its gluing is servo feeding, which is the most accurate way of gluing in the world
2. The design of automatic gluing, so that the sole and vamp do not need to wipe glue first, not only save labor, but also after molding, it does not degumm, to ensure the perfect shape. （SP-N738MAL+/SP-N738MAL/SP-N738MAH+/SP-N738MAH/SP-N738MA+/SP-N738MA)
3. Five point tightening device and special track sweeper. After the upper is tied, the vamp is even and close to the last without any angle, so as to ensure the quality.
4. The central fixed seat of the tightening device adopts the latest lever type quick disassembly design, and the tightening device can be quickly replaced by only up and down alarm.
5. The pressing mechanism of toe cap adopts adjustable two-stage pressure, so that the best pressing effect can be achieved in the process and at the end of the upper bonding. The pressing head can be pressed at one time according to the different material of the vamp, and two pressing methods of constant pressure and positioning can be selected to make the upper bonding smoother.
The first claw can be replaced in 6 seconds.
7. The first, second and third claws have the function of micro release, which can be used to tie the upper of pointed shoes.
8. The middle claw can be adjusted according to the 15 ° deflection of the toe shape, which is suitable for the arrangement of claw plates of special shoes.
9. After clamping the vamp, each group of claws has the function of manually controlling any group of claws to release and then clamp.
10. The angle of the second claw can be adjusted electrically according to the shape of the toe cap, so as to meet the needs of quick shoe change.
11. The size of the claw plate can be adjusted separately on the left and right sides, and the left and right synchronous actions can be controlled to make the shoe size adjustment faster.
12. The fifth claw has the function of turning inward, and the rotation angle can be adjusted according to the needs, so that the vamp can stick to the last more when the upper is tied.
13. Each claw has independent automatic pull-down stroke setting and manual lifting adjustment, which can be set separately to balance the tension of the vamp, so as to correct the best position of the upper.
14. Sp-n738mal + / sp-n738mal / sp-n738al left and right claw discs can be selected to set the left and right feet to swing automatically. It also has the function of manual switch at any time. The position of left and right feet is displayed with light signal.
15. The falling end point of the new designed big base of the sweeper is set outside, which can be adjusted quickly without using tools.
16. The rising of the inner support platform can be set as two-stage action, which can prevent the last from sliding with the action of heel top seat.
17. In the new design, the rising and falling stop points of the inner support platform are quickly adjusted from the outside and attached with a digital position display, with an accuracy of 0.1m/m and the most accurate reproducibility.
18. There are two speed functions for the rising of the inner support platform, which can improve the production efficiency for the easy broken upper.
19. The front and rear positions of the inner and outer support platforms (rubber discs) can be quickly adjusted by the front hand wheel, with a maximum of 16mm, which is more flexible and convenient for the adjustment of shoe binding.
20. The rubber plate adopts a double section structure, which can adjust the size, and can also make the inner and outer waists of the left and right feet swing automatically, so as to make the rubber position more perfect.
21. The adjustment devices for pressure and speed control of each mechanism are equipped externally with pressure gauge display, which makes the operation and adjustment more convenient and rapid.
Sp-n738mah + / sp-n738mah / sp-n73bah the latest design of the three-layer track claw plate structure, the rotary dot can be moved left and right, with the claw size of the quick release structure, quickly achieve the different shoe claw arrangement.
23. A. the parameters of each action point and the end point of the sweeper stroke are set and modified by touch on the man-machine screen. The sweeper has the functions of inching and speed regulation, which makes the adjustment of the sweeper easier.
b. It has the function of automatic detection and detection of electronic control fault, and the fault position can be displayed by taking pictures of the parts, so the maintenance is very convenient.