SP-728A Multiple-Function Hydraulic Automatic Heel and Seat Lasting Machine
Sp-728a features
1. This machine is suitable for general insole, soft middle and heel knot with shoe last height less than 180mm.
2. The high and low speed oil way system of last rising positioning can accurately control the rising height and position, so as to achieve better wall bonding effect.
3. There is a back movement mode for the knife selection and positioning process, which can be selected when the heel and upper need to be modified after the last is tightened. (patented)
4. The accumulated stroke can be quickly adjusted from the outside with digital stroke display, which is more convenient to adjust for different shoe types.
5. The pressure adjustment of the tightening device, the adapter rising and the adapter pulling inside is arranged outside, and the display of the whole force meter is attached, which makes the operation and adjustment more convenient. (patent application)
6. The specifications of the sweeper and the beam alarm device are complete, which can be applied to a variety of shoe types. The detection strip type of the tightening device has the best beam effect.
7. There is a second finishing action on the last row table, which is matched with the knife selecting and natural adding device to make the heel flat and not connected to the angle after the upper is tied, so that the double effect is the best.
8. This machine can also use Goodyear shoe-shaped knot X. there are also special accessories for eversion club, which can be used for optional installation.
Sp-727a features
1. This machine is suitable for taking the upper after the general and soft insoles with shoe lattice height less than 180mm.
2. The positioning rod has the structure of height fine adjustment, which makes it easy to adjust the shoe upper checking height and accurate positioning.
3. The specifications of the sweeper and the tightening device are complete, which can be applied to any shoe type; the tightening device is coated with chain, which has the best tightening effect.
4. The design of gear, tooth thread and ratchet wheel is adopted in the auxiliary table, which can adjust the height quickly and accurately.
5. The second gathering design of the last row table, combined with the sweeper pre setting device, can make the heel flat without hair angle, improve the effect of binding, and improve the quality of shoes.
6. The machine is equipped with valgus components for selection, which is suitable for the production of valgus shoes.